Wykaz publikacji wybranego autora

Magdalena Rozmus-Górnikowska, dr inż.

adiunkt

Wydział Inżynierii Metali i Informatyki Przemysłowej
WIMiIP-kip, Katedra Inżynierii Powierzchni i Analiz Materiałów


  • 2018

    [dyscyplina 1] dziedzina nauk inżynieryjno-technicznych / inżynieria materiałowa


[poprzednia klasyfikacja] obszar nauk technicznych / dziedzina nauk technicznych / inżynieria materiałowa


Identyfikatory Autora Informacje o Autorze w systemach zewnętrznych

ORCID: 0000-0002-0191-6323 orcid iD

ResearcherID: S-5602-2017

Scopus: 36160778100

PBN: 5e70920b878c28a04738f0fb

OPI Nauka Polska

System Informacyjny AGH (SkOs)





Liczba pozycji spełniających powyższe kryteria selekcji: 70, z ogólnej liczby 71 publikacji Autora


1
  • Analiza przemian fazowych w napoinach stopu Inconel 625 podczas wyżarzaniaAnalysis of phase transformations in Inconel 625 joints during anealing / P. PETRZAK, K. KOWALSKI, M. ROZMUS-GÓRNIKOWSKA // W: XLIV Szkoła Inżynierii Materiałowej : Kraków–Rytro, 27–30 IX 2016 : monografia / pod red. Jerzego Pacyny ; Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydział Inżynierii Metali i Informatyki Przemysłowej. — Kraków : Wydawnictwo Naukowe AKAPIT, 2016. — Na okł. dod.: XLIV Prace Szkoły Inżynierii Materiałowej. — Opis częśc. wg okł.. — ISBN: 978-83-63663-73-5. — S. 264–266. — Bibliogr. s. 266, Streszcz., Abstr.

  • słowa kluczowe: wyżarzanie, mikrosegregacja, Inconel 625

    keywords: annealing, Inconel 625, microsegregation

    cyfrowy identyfikator dokumentu:

2
  • Analysis of Inconel 625 and 686 after high-temperature corrosion at the waste incineration ashes by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) / M. SOLECKA, J. KUSIŃSKI, M. ROZMUS-GÓRNIKOWSKA, A. RADZISZEWSKA, A. KOPIA // W: XXIII CAC 2015 : Conference on Applied Crystallography : 20–24 September 2015, Krynica-Zdrój, Poland : programme & abstracts. — [Krynica-Zdrój : s. n.], [2015]. — S. 226–227. — Bibliogr. s. 227

  • keywords: XRD quantitative analysis, EDS quantitative analysis, Inconel 625 and 686

    cyfrowy identyfikator dokumentu:

3
4
  • Badania mikrostruktury i mikrosegregacji składu chemicznego warstw ze stopu Inconel 625 napawanych techniką CMT na podłoże ze stali 16Mo3The investigations of microstructure and microsegregation of an Inconel 625 weld overlay produced on 16Mo3 steel by CMT technique / Magdalena ROZMUS-GÓRNIKOWSKA // Przegląd Spawalnictwa = Welding Technology Review / Stowarzyszenie Inżynierów i Techników Mechaników Polskich ; ISSN 0033-2364. — 2014 vol. 86 nr 12, s. 4–8. — Bibliogr. s. 8, Streszcz., Abstr.. — Errata do afiliacji w Przeglądzie Spawalnictwa 2015 vol. 87 nr 7 s. 40

  • słowa kluczowe: mikrostruktura, skład chemiczny, mikrosegregacja, napawanie łukowe, Inconel 625, Cold Metal Transfer, CMT

    keywords: microstructure, chemical composition, weld overlay, Inconel 625, microsegregation, napoina, CMT, arc welding, Cold Metal Transfer

    cyfrowy identyfikator dokumentu:

5
  • Characterization of Inconel 625 surface layer modified by laser shock processing / Magdalena ROZMUS-GÓRNIKOWSKA, Jan KUSIŃSKI, Łukasz CIENIEK // International Journal of Materials Research ; ISSN 1862-5282. — Tytuł poprz.: Zeitschrift für Metallkunde. — 2019 vol. 110 no. 1, s. 82–85. — Bibliogr. s. 85. — J. Kusiński, Ł. Cieniek – brak afiliacji AGH. — 16th international conference on Electron microscopy : Jachranka, Poland, September 10-13, 2017

    orcid iD
  • keywords: microstructure, SEM, TEM, Inconel 625, LSP

    cyfrowy identyfikator dokumentu: 10.3139/146.111711

6
7
8
  • Effect of laser shock peening on the microstructure and properties of the Inconel 625 surface layer / Magdalena ROZMUS-GÓRNIKOWSKA, Jan KUSIŃSKI, Łukasz CIENIEK // Journal of Materials Engineering and Performance ; ISSN 1059-9495. — 2020 vol. 29 iss. 3, s. 1544-1549. — Bibliogr. s. 1548-1549. — Publikacja dostępna online od: 2020-02-19. — AMT 2019 : the XXII Physical Metallurgy and Materials Science Conference: Advanced Materials and Technologies : Bukowina Tatrzańska, June 9–12, 2019. — tekst: https://link.springer.com/content/pdf/10.1007/s11665-020-04667-3.pdf

    orcid iD
  • keywords: microstructure, surface roughness, Inconel 625, LSP, laser shock peening, nano hardness

    cyfrowy identyfikator dokumentu: 10.1007/s11665-020-04667-3

9
  • Effect of titanium on microstructure and mechanical properties of mechanically alloyed $Nb-Ti-Al$ alloys / M. ROZMUS, M. BLICHARSKI, S. DYMEK // W: microCEM : workshop on “Progress in microstructure Characterization by Electron Microscopy” : 30 September – 2 October 2005, Zakopane, Poland : book of abstracts. — Krakow : Polish Academy of Sciences. Institute of Metallurgy and Materials Science, 2005. — S. 34, P 3

  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

10
  • Effect of titanium on microstructure and mechanical properties of mechanically alloyed $Nb-Ti-Al$ alloysWpływ tytanu na mikrostrukturę i własności mechaniczne stopów $Nb-Ti-Al$ wytwarzanych mechaniczną syntezą / M. ROZMUS, M. BLICHARSKI, S. DYMEK // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2006 vol. 51 iss. 1 spec. iss., s. 87–90. — Bibliogr. s. 90. — MicroCEM : workshop on “Progress in Microstructure Characterization by Electron Microscopy” : 30 September – 2 October 2005, Zakopane, Poland / eds.: Ewa Bełtowska, Marek Faryna, Krzysztof Sztwiertnia ; Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science. Kraków, Poland. — Warszawa, Kraków : PAS, 2006

  • keywords: mechanical alloying, niobium aluminides

    cyfrowy identyfikator dokumentu:

11
12
  • Influence of boiler pipe cladding techniques on their microstructure and propertiesWpływ sposobu napawania rur kotłowych na ich mikrostrukturę i własności / M. ROZMUS-GÓRNIKOWSKA, M. BLICHARSKI, J. KUSIŃSKI, L. Kusiński, M. Marszycki // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2013 vol. 58 iss. 4, s. 1093–1096. — Bibliogr. s. 1096

  • keywords: mechanical properties, microstructure, cladding, GMAW, GTAW, CMT, Cold Metal Transfer

    cyfrowy identyfikator dokumentu: 10.2478/amm-2013-0131

13
  • Influence of boiler pipes cladding methods on overlay coatings microstructure and chemical composition : [abstract] / ROZMUS-GÓRNIKOWSKA Magdalena, BLICHARSKI Marek, KUSIŃSKI Jan, Kusiński Ludwik, Marszycki Marek // W: AMT'2013 : Advanced Materials and Technologies : XX physical metallurgy and materials science conference : 9–12 June 2013, Kudowa Zdrój / Częstochowa University of Technology. Institute of Materials Engineering. — [Częstochowa : University of Technology], [2013]. — Opis częśc. wg okł.. — S. 43

  • keywords: microstructure, chemical composition, cladding, GMAW, GTAW, CMT, Cold Metal Transfer, gas metal arc welding, Gas Tangsten Arc Welding

    cyfrowy identyfikator dokumentu:

14
  • Influence of weld overlaying methods on microstructure and chemical composition of Inconel 625 boiler pipe coatings / M. ROZMUS-GÓRNIKOWSKA, M. BLICHARSKI, J. KUSIŃSKI // Kovové Materiály = Metallic Materials ; ISSN 0023-432X. — 2014 vol. 52 iss. 3, s. 141–147. — Bibliogr. s. 146–147, Abstr.

  • keywords: microstructure, chemical composition, GMAW, GTAW, weld overlay, CMT, Cold Metal Transfer, gas tungsten arc welding, gas metal arc welding

    cyfrowy identyfikator dokumentu: 10.4149/km_2014_3_141

15
  • Investigation of Ni-base coatings after corrosion testCharakterystyka napoin ze stopów niklu po wysokotemperaturowym utlenianiu / Monika SOLECKA, Agnieszka RADZISZEWSKA, Agnieszka KOPIA, Magdalena ROZMUS-GÓRNIKOWSKA, Jan KUSIŃSKI // Inżynieria Materiałowa ; ISSN 0208-6247. — 2016 R. 37 nr 4, s. 190–195. — Bibliogr. s. 194. — Tekst pol.-ang.

  • słowa kluczowe: Inconel 625, Inconel 686, warstwa korozyjna

    keywords: Inconel 625, Inconel 686, corrosion layer

    cyfrowy identyfikator dokumentu: 10.15199/28.2016.4.7

16
  • Investigation of the life-time of drills covered with the anti-wear $Cr(C, N)$ complex coatings, deposited by means of Arc-PVD technique / J. KUSIŃSKI, M. ROZMUS, J. Bujak // Journal of Achievements in Materials and Manufacturing Engineering ; ISSN 1734-8412. — 2009 vol. 33 iss. 1, s. 86–93. — Bibliogr. s. 93, Abstr.. — tekst: http://www.journalamme.org/papers_vol33_1/33111.pdf

  • słowa kluczowe: mikrostruktura, powłoka, EDS, metoda Arc-PVD, powłoka Cr(N,C), test wiercenia, test na zarysowanie

    keywords: microstructure, wear, EDS, Cr(N,C) coatings, Arc-PVD, drilling test, scratch-test

    cyfrowy identyfikator dokumentu:

17
  • Investigations of Inconel 625 and Inconel 686 after high-temperature corrosion at the waste incineration ash / M. SOLECKA, M. ROZMUS-GÓRNIKOWSKA, A. RADZISZEWSKA, J. KUSIŃSKI // W: C-MAC Euroschool 2015 [Dokument elektroniczny] : material synthesis and characterization applied to complex metallic alloys : Bratislava, Slovakia, June 1–5, 2015 : program and abstracts / ed. Marc de Boissieu, Marek Mihalkovič, Peter Švec. — Wersja do Windows. — Dane tekstowe. — [Bratislava : VEDA, Publishing House of the Slovak Academy of Sciences], 2015. — e-ISBN: 978-80-224-1441-8. — S. [1] ID P-07. — Wymagania systemowe: Adobe Reader. — Tryb dostępu: http://www.eucmac.eu/images/stories/Book_of_Abstracts_and_Program_C-MAC_Euroschool_2015.pdf [2015-09-28]

  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

18
  • Investigations of the transition zone in Inconel 625 coating weld overlaid on the boiler pipe / M. ROZMUS-GÓRNIKOWSKA // W: AMT 2016 : Advanced Materials and Technologies : XXI physical metallurgy and materials science conference : Rawa Mazowiecka, June 5–8, 2016 : conference abstracts. — [Polska] : BEL Studio Sp. z o. o., [2016]. — ISBN: 978-83-7798-600-4. — S. [1] BP12

  • keywords: microstructure, Inconel 625, transition zone, boiler pipe

    cyfrowy identyfikator dokumentu:

19
20
  • Laser shock peening of a stainless steel / M. ROZMUS, J. KUSIŃSKI, M. BLICHARSKI // W: CIP 2009 : 17\textsuperscript{th} international Colloquium on Plasma Processes : June 22–26, 2009 Marseille (France) : abstract booklet. — Paris : SFV Société Française du Vide, cop. 2009. — ISBN: 978-2-918641-00-1. — S. 217

  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

21
  • Laser shock peening of a $Ti6Al4V$ titanium alloyLaserowa odkształcająca obróbka powierzchniowa stopu tytanu $Ti6Al4V$ / M. ROZMUS, J. KUSIŃSKI, M. BLICHARSKI, J. Marczak // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2009 vol. 54 iss. 3, s. 665–670. — Bibliogr. s. 670. — VI Scientific seminar on Integrated study on the foundations of plastic deformation of metals – the PLASTMET 2008 : Łańcut, Poland, November 25–28, 2008 / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science. — Warszawa ; Kraków : PAS. Committee of Metallurgy. Institute of Metallurgy and Materials Science, 2009

  • keywords: microstructure, titanium alloy, surface layer, LSP, laser shock peening, hardness

    cyfrowy identyfikator dokumentu:

22
  • Laser shock processing of an austenitic stainless steelLaserowo odkształcająca obróbka powierzchniowa stali austenitycznej X5CrNi18-10 / M. ROZMUS-GÓRNIKOWSKA, J. KUSIŃSKI, M. BLICHARSKI // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2010 vol. 55 iss. 3, s. 635–639. — Bibliogr. s. 639

  • keywords: microstructure, austenitic stainless steels, laser shock processing, surface treatment, surface roughness, compressive residual stresses

    cyfrowy identyfikator dokumentu:

23
  • Laserowa odkształcająca obróbka powierzchniowa stopu tytanu ${Ti_{6}Al_{4}V}$Laser shock peening of a Ti6Al4V titanium alloy / M. ROZMUS, J. KUSIŃSKI, M. BLICHARSKI // W: PLASTMET'2008 : zintegrowane studia podstaw deformacji plastycznej metali : VI seminarium naukowe : 25 listopada – 28 listopada 2008 Łańcut–Zamek / Sekcja Teorii Procesów Przeróbki Plastycznej Komitetu Metalurgii PAN, Sekcja Mechaniki Materiałów Komitetu Mechaniki PAN. — [Polska : PAN], [2008]. — S. [1–2]. — Bibliogr. s. [2]

  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

24
  • Laserowo odkształcona warstwa wierzchnia stopu tytanu Ti6Al4VLaser shot processing of Ti6Al4V titanium alloy / Magdalena ROZMUS, Jan KUSIŃSKI, Marek BLICHARSKI, Łukasz Major // Inżynieria Materiałowa ; ISSN 0208-6247. — 2009 R. 30 nr 5, s. 366–369. — Bibliogr. s. 369

  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

25
  • Laserowo odkształcona warstwa wierzchnia stopu tytanu Ti6Al4VLaser shot processing of Ti6Al4V titanium alloy / Magdalena ROZMUS, Jan KUSIŃSKI, Marek BLICHARSKI, Łukasz Major // W: Tytan i jego stopy : X międzynarodowa konferencja naukowa : Kazimierz Dolny, 14–16.09.2009 : [streszczenia] = Titanium and titanium alloys : 10th international conference : [abstracts]. — [Polska : s. n.], [2009]. — Opis wg okł.. — S. 39. — Tekst pol.-ang.. — Brak afiliacji AGH

  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu: