emeryt
Faculty of Non-Ferrous Metals WMN-knmimn
ORCID: 0000-0003-1403-0166 połącz konto z ORCID
ResearcherID: brak
Scopus: 7004138923
OPI Nauka Polska
System Informacyjny AGH (SkOs)
$Al-Sc$ master alloy prepared by mechanical alloying of aluminum with addition of $Sc_{2}O_{3}$ / H. Fujii, H. Akiyama, J. Kaneko, M. Sugamata, L. BŁAŻ // Materials Transactions ; ISSN 1345-9678. — 2003 vol. 44 iss. 5, s. 1049–1052. — Bibliogr. s. 1052
keywords: grain refining, powder metallurgy, mechanical alloying, solid state reaction, aluminium-scandium alloy, scandium oxide, ingot casting
cyfrowy identyfikator dokumentu: 10.2320/matertrans.44.1049
Aluminum based materials containing low melting and high melting metals produced by mechanical alloying with addition of metal oxides / J. Kaneko, M. Sugamata, L. BŁAŻ, R. Kamei // Materials Science Forum ; ISSN 0255-5476. — Tytuł poprz.: Diffusion and Defect Monograph Series. — 2002 vols. 396–402, s. 161–166. — Bibliogr. s. 166, Abstr.. — 8th International conference on Aluminium alloys : Cambridge, England, July 02-05, 2002
keywords: powder metallurgy, mechanical alloying, metal oxide, reaction milling, low melting metal, high melting metal
cyfrowy identyfikator dokumentu: 10.4028/www.scientific.net/MSF.396-402.16
Aluminum-low melting metal alloys prepared by mechanical alloying with addition of oxide / J. Kaneko, M. Sugamata, L. BŁAŻ, R. Kamei // Key Engineering Materials ; ISSN 1013-9826. — 2000 vol. 188, s. 73–81. — Bibliogr. s. 81, Abstr.. — Development in light metals : science, technology and applications : proceedings of the international conference : Il Ciocco, Italy, September 19–24, 1999
keywords: aluminium, metal oxides, powder metallurgy, mechanical alloying, reaction milling, low melting metal
cyfrowy identyfikator dokumentu: 10.4028/www.scientific.net/KEM.188.73
An analysis of the microstructure and mechanical properties of rapidly solidified Al-1Fe-1Ni-5Mg alloy / Anna KULA, Ludwik BŁAŻ, Makoto Sugamata // Key Engineering Materials ; ISSN 1013-9826. — 2015 vol. 641, s. 3–9. — Bibliogr. s. 9, Abstr.. — New materials and processing technologies : selected, peer reviewed papers from the international conference of non-ferrous metals – processing and new technologies : June 4–6, 2014, Wisła, Poland. — tekst: http://www.scientific.net/KEM.641.3.pdf
keywords: aluminium alloys, TEM, rapid solidification, plastic consolidation
Zobacz pełny wykaz publikacji Autora/Autorów: Anna Kula
cyfrowy identyfikator dokumentu: 10.4028/www.scientific.net/KEM.641.3
Analysis of the impact of modifiers on the formation of non-metallic inclusions during continuous casting of CuZn39Pb2 brass / A. W. Bydałek, A. KULA, L. BŁAŻ, K. Najman // Archives of Foundry Engineering / Polish Academy of Sciences. Commission of Foundry Engineering ; ISSN 1897-3310. — Tytuł poprz.: Archiwum Odlewnictwa. — 2019 vol. 19 iss. 3, s. 21–26. — Bibliogr. s. 26, Abstr.. — tekst: http://www.afe.polsl.pl/index.php/pl/4862/analysis-of-the-impact-of-modifiers-on-the-formation-of-non-metallic-inclusions-during-continuous-casting-of-cuzn39pb2-brass.pdf
keywords: continuous casting, metallography, precipitates, leaded brass, scraps
cyfrowy identyfikator dokumentu: 10.24425/afe.2019.127132
Annealing and hot deformation of Al-based composite hardened with niobium oxide dispersions / L. BŁAŻ, J. Kaneko, M. Sugamata, Z. SIERPIŃSKI, M. TUMIDAJEWICZ // Archives of Materials Science ; ISSN 1734-9885. — 2005 vol. 26 no. 1–2, s. 73–78. — Bibliogr. s. 78, Abstr.. — 5th Polish-Japanese symposium on Advanced methods of materials characterization : 28.08-2.09.2004
brak zdefiniowanych słów kluczowych
Zobacz pełny wykaz publikacji Autora/Autorów: Zdzisław Sierpiński, Marek Tumidajewicz
cyfrowy identyfikator dokumentu:
Anomalies in precipitation hardening process of 7075 aluminum alloy extruded by KOBO method / A. KORBEL, W. BOCHNIAK, J. Borowski, L. BŁAŻ, P. OSTACHOWSKI, M. ŁAGODA // Journal of Materials Processing Technology ; ISSN 0924-0136. — 2015 vol. 216, s. 160–168. — Bibliogr. s. 168, Abstr.. — A. Korbel, W. Bochniak – dod. afiliacja: Metal Forming Institute. — tekst: http://www.sciencedirect.com/science/article/pii/S0924013614003410/pdfft?md5=e688de128c9a2ecb79a6de460a98ea73&pid=1-s2.0-S0924013614003410-main.pdf
keywords: KOBO extrusion, point defects, 7075 aluminum alloy, precipitation kinetics
Zobacz pełny wykaz publikacji Autora/Autorów: Włodzimierz Bochniak, Andrzej Korbel, Paweł Ostachowski, Marek Łagoda
cyfrowy identyfikator dokumentu: 10.1016/j.jmatprotec.2014.09.008
Cechy strukturalne i właściwości kompozytów uzyskanych metodą mechanicznej syntezy aluminium i tlenków metali — Mechanically alloyed aluminum-metal oxide composites / Ludwik BŁAŻ // Hutnik Wiadomości Hutnicze : czasopismo naukowo-techniczne poświęcone zagadnieniom hutnictwa ; ISSN 1230-3534. — 2004 R. 71 nr 7–8, s. 320–323. — Bibliogr. s. 323, Streszcz., Abstr.. — Problemy metaloznawstwa we współczesnej technice : seminarium Katedry Metaloznawstwa i Technologii Materiałowych : Kielce, wrzesień 2004 / Politechnika Świętokrzyska. Wydział Mechatroniki i Budowy Maszyn. — Warszawa : Wydawnictwo Czasopism i Książek Technicznych SIGMA-NOT Sp. z o. o., 2004
słowa kluczowe: wyżarzanie, mechaniczna synteza, stopy aluminium, fazy międzymetaliczne, tlenki metali przejściowych, mikroskopia elektronowa, kompozyt metaliczny, mikroanaliza chemiczna
keywords: aluminium alloys, TEM, annealing, mechanical alloying, EDS, STEM, oxide additives, metal composites, X-ray chemical analysis, compounds
Characteristics of an $Al-V_2O_5$ composite produced by powder metallurgy — Charakterystyka kompozytu $Al-V_2O_5$ wytworzonego metodą metalurgii proszków / Tomasz SKRZEKUT, Ludwik BŁAŻ // Metallurgy and Foundry Engineering MaFE = Metalurgia i Odlewnictwo / AGH University of Science and Technology ; ISSN 1230-2325. — 2019 vol. 45 no. 2, s. 51–58. — Bibliogr. s. 57–58, Abstr., Streszcz.. — tekst: http://journals.bg.agh.edu.pl/METALLURGY/2019.45.2/mafe.2019.45.2.51.pdf
słowa kluczowe: konsolidacja plastyczna, metalurgia proszków, mechaniczna synteza, kompozyt Al-V2O5
keywords: plastic consolidation, powder metallurgy, mechanical alloying, Al-V2O5 composite
Zobacz pełny wykaz publikacji Autora/Autorów: Tomasz Skrzekut
cyfrowy identyfikator dokumentu: 10.7494/mafe.2019.45.2.51
Codeposition of SiC particles with electrolytic cobalt in the presence of $Cs^{+}$ ions / Ewa RUDNIK, Lidia BURZYŃSKA, Jacek Jędruch, Ludwik BŁAŻ // Applied Surface Science ; ISSN 0169-4332. — Tytuł poprz.: Applications of Surface Science. — 2009 vol. 255 iss. 16, s. 7164–7171. — Bibliogr. s. 7171, Abstr.. — tekst: http://www.sciencedirect.com/science/article/pii/S0169433209003213/pdfft?md5=b23099121e0308682524a762d92bbce4&pid=1-s2.0-S0169433209003213-main.pdf
keywords: electrodeposition, adsorption, silicon carbide, composite, cobalt, cesium
Zobacz pełny wykaz publikacji Autora/Autorów: Lidia Burzyńska, Ewa Rudnik
cyfrowy identyfikator dokumentu: 10.1016/j.apsusc.2009.03.053
Effect of annealing temperature on the structure and mechanical properties of mechanically alloyed ${AlMg-Nb_{2}O_{5}}$ and ${AlMg-ZrSi_{2}}$ composites / A. KULA, L. BŁAŻ, J. Kaneko, M. Sugamata // Journal of Microscopy ; ISSN 0022-2720. — 2010 vol. 237 iss. 3 spec. iss., s. 421–426. — Bibliogr. s. 426, Summ. — Zastosowano procedurę peer review. — EM 2008 : XIII international conference on Electron Microscopy. — tekst: http://onlinelibrary.wiley.com/doi/10.1111/j.1365-2818.2009.03277.x/pdf
keywords: nano structure, mechanical alloying, zirconium, aluminium composite, disperse particle hardening, niobium oxide
cyfrowy identyfikator dokumentu: 10.1111/j.1365-2818.2009.03277.x
Effect of annealing temperature on the structure of mechanically alloyed $Al-AgO$ composite / SKRZEKUT Tomasz, KULA Anna, BŁAŻ Ludwik, Sugamata Makoto // W: Metal 2015 : 24\textsuperscript{th} international conference on Metallurgy and materials : June 3\textsuperscript{rd}–5\textsuperscript{th} 2015, Brno, Czech Republic : proceedings of abstracts / TANGER Ltd., [et al.]. — Ostrava : TANGER Ltd., cop. 2015. — ISBN: 978-80-87294-58-1. — S. 159. — Pełny tekst na dołączonym CD-ROMie. — S. [1–5] poz. 3967. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. [5], Abstr. — W wersji elektronicznej brak nazwiska autora Makoto Sugamata. — W bazie Web of Science ISBN: 978-80-87294-62-8, brak nazwiska Sugamata oraz zakres stron: 1639–1643
keywords: powder metallurgy, mechanical alloying, aluminium composite, powder's consolidation
Zobacz pełny wykaz publikacji Autora/Autorów: Anna Kula, Tomasz Skrzekut
Effect of heterogeneous deformation on precipitate distribution in $Al-3\cdot7Cu$ and $Al-3\cdot8Cu-1\cdot8Mg$ alloys / L. BŁAŻ, K. Pieła // Materials Science and Technology ; ISSN 0267-0836. — 2007 vol. 23 no. 4, s. 400–406. — Bibliogr. s. 406. — Publikacja dostępna online od: 2013-12-02. — tekst: https://goo.gl/7ttSEl
keywords: shear bands, hot rolling, inhomogeneous precipitation, Al-Cu alloys
Zobacz pełny wykaz publikacji Autora/Autorów: Krzysztof Pieła
cyfrowy identyfikator dokumentu: 10.1179/174328407X158604
Effect of localized flow on $\Theta$-particles distribution in Al-Cu alloys / O. Woznicka, L. BŁAŻ, E. Evangelista // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2004 vol. 378 iss. 1-2, s. 339–342. — Bibliogr. s. 342, Abstr.. — 9th International symposium on Physics of materials : Prague, Czech Republic, September 01-04, 2003. — tekst: https://www-1sciencedirect-1com-1000027kl00b1.wbg2.bg.agh.edu.pl/science/article/pii/S0925838804001379/pdfft?md5=2d429efda20805cb3990d7eac3a68897&pid=1-s2.0-S0925838804001379-main.pdf
keywords: dislocations, precipitation, strain, scanning electron microscopy, metals, transmission electron microscopy
cyfrowy identyfikator dokumentu: 10.1016/j.jallcom.2003.12.050
Effect of magnesium addition and rapid solidification procedure on structure and mechanical properties of $Al-Co$ alloy — Wpływ dodatku magnezu i procesu szybkiej krystalizacji na strukturę i własności mechaniczne stopu $Al-Co$ / M. ZYGMUNT-KIPER, L. BŁAŻ, M. Sugamata // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2013 vol. 58 iss. 2, s. 399–406. — Bibliogr. s. 406
keywords: rapid solidification, high temperature deformation, Al-Co aluminum alloys
Zobacz pełny wykaz publikacji Autora/Autorów: Marta Zygmunt-Kiper
cyfrowy identyfikator dokumentu: 10.2478/amm-2013-0007
Effect of magnesium addition on properties of $Al$-based composite reinforced with fine $NiO$ particles — Wpływ dodatku $Mg$ na właściwości kompozytu na osnowie $Al$ umocnionego dyspersyjnymi czątkami $NiO$ / M. ZYGMUNT-KIPER, L. BŁAŻ, M. Sugamata // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2014 vol. 59 iss. 2, s. 431–435. — Bibliogr. s. 435
keywords: SEM, TEM, mechanical alloying, powder consolidation, metal matrix composite, nano crystalline material, powder processing, STEM, Al-Mg-NiO, solid state chemical reaction
cyfrowy identyfikator dokumentu: 10.2478/amm-2014-0071
Effect of mechanical structure refinement on precipitation hardening response for 7N01 aluminum alloy / A. KULA, L. BŁAŻ, J. Koziel, M. Sugamata, G. WŁOCH // W: Problems of modern techniques in engineering and education / editorial board: Iwona Sulima, Marcin Kowalski, Piotr Malczewski ; Pedagogical University of Cracow. Institute of Technology. — Cracow : IT PU, cop. 2008 + CD-ROM. — ISBN10: 83-87331-48-1. — S. 63–68. — Bibliogr. s. 67–68, Abstr.
Zobacz pełny wykaz publikacji Autora/Autorów: Anna Kula, Grzegorz Włoch
Effect of mechanical structure refinement on precipitation hardening response for 7N01 aluminum alloy / A. KULA, L. BŁAŻ, J. Koziel, M. Sugamata, G. WŁOCH // W: Intelligent Information Systems 2002 : proceeedings of the IIS' 2002 symposium : Sopot, Poland, June 3–6, 2002 / eds. Mieczysław A. Kłopotek, Sławomir T. Wierzchoń, Maciej Michalewicz ; Institute of Computer Science of Polish Academy of Sciences. — Heidelberg ; New York : Physica-Verlag, 2002. — (Advances in Soft Computing ; ISSN 1615-3871 ; 17). — ISBN10: 3-7908-1509-8. — S. 63–68. — Bibliogr. s. 67–68, Abstr.
Effect of rapid solidification on structure and mechanical properties of Al-6Mn-3Mg alloy / P. LOBRY, L. BŁAŻ, M. Sugamata, A. KULA // Archives of Materials Science and Engineering ; ISSN 1897-2764. — Tytuł poprz.: Archives of Materials Science. — 2011 vol. 49 iss. 2, s. 97–102. — Bibliogr. s. 102, Abstr.. — PLASTMET : science seminar : integrated studies of fundamentals of metals plastic deformation : Łańcut, Poland 30.11. – 3.12. 2010
keywords: rapid solidification, Al-Mn-Mg alloy, hot deformation, formability, Al6Mn particle fracture
Zobacz pełny wykaz publikacji Autora/Autorów: Anna Kula, Patrycja Lobry
Effect of rapid solidification on the structure and mechanical properties of ${Al-4Fe-4Ni}$ alloy / Anna KULA, Ludwik BŁAŻ, Makoto Sugamata, Grzegorz WŁOCH // Inżynieria Materiałowa ; ISSN 0208-6247. — 2010 R. 31 nr 3, s. 550–553. — Bibliogr. s. 553
Effect of temperature on the structure and mechanical properties of mechanically alloyed $Al-NiO$ composite — Wpływ temperatury na strukturę i właściwości kompozytu $Al-NiO$ wytworzonego metodą mechanicznej syntezy składników / M. ZYGMUNT-KIPER, L. BŁAŻ, M. Sugamata // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2014 vol. 59 iss. 1, s. 121–126. — Bibliogr. s. 125–126
keywords: SEM, TEM, mechanical alloying, powder consolidation, metal matrix composite, Al-NiO, nano crystalline material, powder processing, STEM, solid state chemical reaction
cyfrowy identyfikator dokumentu: 10.2478/amm-2014-0019
Effects of extrusion parameters by KoBo method on the mechanical properties and microstructure of aluminum — Wpływ parametrów wyciskania metodą KoBo na własności mechaniczne i strukturę aluminium / K. PIEŁA, L. BŁAŻ, M. JASKOWSKI // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2013 vol. 58 iss. 3, s. 683–689. — Bibliogr. s. 688–689
keywords: aluminium, electrical resistivity, work hardening, KOBO extrusion
Zobacz pełny wykaz publikacji Autora/Autorów: Krzysztof Pieła, Marcin Jaskowski
cyfrowy identyfikator dokumentu: 10.2478/amm-2013-0055
Electrodeposition and heat treatment of nickel/silicon carbide composites / Lidia BURZYŃSKA, Ewa RUDNIK, Jakub Koza, Ludwik BŁAŻ, Wojciech Szymański // Surface and Coatings Technology ; ISSN 0257-8972. — 2008 vol. 202 iss. 12, s. 2545–2556. — Bibliogr. s. 2556, Abstr.. — Publikacja dostępna online od: 2007-09-25 J. Koza - afiliacja: Leibniz Institute for Solid State and Materials Research Dresden. — tekst: http://goo.gl/i59oCR
keywords: microstructure, heat treatment, electrodeposition, SiC, composite, nickel
cyfrowy identyfikator dokumentu: 10.1016/j.surfcoat.2007.09.020
Evaluation of precipitates type in brasses as a function of charge material / A. W. Bydałek, K. Najman, A. KULA, S. Biernat, L. BŁAŻ, W. Wołczyński // Archives of Foundry Engineering / Polish Academy of Sciences. Commission of Foundry Engineering ; ISSN 1897-3310. — Tytuł poprz.: Archiwum Odlewnictwa. — 2016 vol. 16 iss. 3, s. 19–24. — Bibliogr. s. 23–24, Abstr.. — tekst: https://goo.gl/Ys7aEB
keywords: metallography, precipitates, leaded brass, scraps
Examination of aluminum matrix composites obtained by powder metalurgy and strenghtened by AgO and CeO2 particles / SKRZEKUT Tomasz, BŁAŻ Ludwik // W: METAL 2018 : 27\textsuperscript{th} international conference on Metallurgy and materials : May 23\textsuperscript{rd} – 25\textsuperscript{th} 2018, Brno, Czech Republic : abstracts. — Ostrava : TANGER Ltd., cop. 2018. — ISBN: 978-80-87294-83-3. — S. 170. — Pełny tekst W: METAL 2018 [Dokument elektroniczny] : 27\textsuperscript{th} international conference on Metallurgy and materials : May 23\textsuperscript{rd}–25\textsuperscript{th} 2018, Brno : conference proceedings : reviewed version. — Dane tekstowe. – Wersja do Windows. — Ostrava : TANGER Ltd., cop. 2018. — 1 dysk optyczny. — S. 1722–1728. — Wymagania systemowe: Adobe Reader ; napęd CD-ROM. — Bibliogr. s. 1727–1728, Abstr. — ISBN 978-80-87294-84-0