Wykaz publikacji wybranego autora

Andrzej Ciaś, dr hab. inż., prof. AGH

profesor nadzwyczajny

Wydział Inżynierii Metali i Informatyki Przemysłowej
WIMiIP-kmm, Katedra Metaloznawstwa i Metalurgii Proszków

[dyscyplina wiodąca] dziedzina nauk inżynieryjno-technicznych / inżynieria materiałowa


[poprzednia klasyfikacja] obszar nauk technicznych / dziedzina nauk technicznych / inżynieria materiałowa


Identyfikatory Autora Informacje o Autorze w systemach zewnętrznych

ORCID: 0000-0002-2059-1309

ResearcherID: brak

Scopus: 6603534977

PBN: 901286

OPI Nauka Polska

System Informacyjny AGH (SkOs)




1
  • A novel method of sintering hybrid steels in an improved semiclosed container system
2
  • Atmosphere effect on sintering behaviour of Astaloy CrM and Astaloy CrL Höganäs powders with manganese and carbon additions
3
  • Chemical reactions during sintering of $Fe-Cr-Mn-Si-Ni-Mo-C$ steels with special reference to processing in semi-closed containers
4
  • Comparison of mechanical properties and microstructure of ${Cr-Mn-Mo}$ steels based on Astaloy CrL and Astaloy CrM pre-alloyed powders
5
  • Dimensional changes, microstructure, microhardness distributions and corrosion properties of iron and iron-manganese sintered materials
6
  • Effect of local sintering microatmosphere on mechanical properties of $Fe-3Cr-0{\cdot}5Mo-0{\cdot}6C$ steel
7
  • Endocardial silicone lead wear: description of tribological phenomena on the basis of microscopic examination of removed leads
8
  • Fracture statistics using three-parameter and two-parameter Weibull distributions for $Fe-0.4C-1.5Cr-1.5Ni-0.8Mn-0.2Mo$ structural sintered steel
9
  • Mechanical properties and microstructure of PM $Mn-Cr-Mo$ steels with low carbon concentration
10
  • Mechanical properties distributions of PM manganese steels analysed by Gaussian and Weibull statistics
11
  • Mechanical properties of ${Fe-3\%Mn-0.8\%C}$ sintered steels based on sponge and atomised iron powders: comparison and probabilistic failure prediction
12
  • Mechanical properties of hybrid Cr, Mn, and Si-containing PM steel when sintered in a local micro-atmosphere
13
  • Microatmosphere sintering of Cr-Mn steel in furnace atmospheres of flowing hydrogen and technical nitrogen
14
  • Microatmosphere sintering of $Fe-3.2Mn-1.5Si-0.5C$ steel in flowing technical nitrogen
15
  • Microstructure and mechanical properties of $Cr-Mn$ structural PM steels
16
  • Microstructure and mechanical properties of ${Fe-2.2Mn-1.5Cr-0.2Mo-0.3C}$ steel sintered at $1120^{\circ}$C and $1250^{\circ}$C
17
18
  • Nickel and copper-free sintered structural steels containing Mn, Cr, Si, and Mo developed for high performance applications
19
  • Pictures of tribological wear on the basis of silicone extracted leads
20
  • Racjonalna gospodarka rudami żelaza na przykładzie metalurgii proszków
21
  • Sinteraustempering of two $Mo-(Cu)-(Cr)-(Ni)-(Mn)-C$ steels in a semi-closed container in flowing nitrogen
22
  • Sintering, microstructure, and mechanical properties of PM manganese-molybdenum steels
23
  • Tensile properties of ${Fe-3Mn-0\cdot 6/0\cdot 7C}$ steels sintered in semiclosed containers in dry hydrogen, nitrogen and mixtures thereof
24
  • The microstructure and properties of low-carbon PM $Mn-Cr-Mo$ steels sintered under different conditions
25
  • The use of Weibull statistics to quantify property variability in $Fe-3Mn-0.8C$ sinter-hardened structurally inhomogeneous steels