Wykaz publikacji wybranego autora

Daniel Pociecha, dr inż.

adiunkt

Wydział Metali Nieżelaznych
WMN-kpp, Katedra Przeróbki Plastycznej i Metaloznawstwa Metali Nieżelaznych


Identyfikatory Autora Informacje o Autorze w systemach zewnętrznych

ORCID: brak

ResearcherID: brak

Scopus: 35932277400

OPI Nauka Polska

System Informacyjny AGH (SkOs)





Liczba pozycji spełniających powyższe kryteria selekcji: 42, z ogólnej liczby 42 publikacji Autora


1
  • [referat, 2015]
  • TytułAn alternative method of nickel superalloys forming
    AutorzyKrzysztof ŻABA, Sandra PUCHLERSKA, Marcin GŁODZIK, Maciej NOWOSIELSKI, Daniel POCIECHA
    ŹródłoICNFM 2015 : [2textsuperscript{nd} International Conference on Non-Ferrous Metals] : Cracow, Poland, June 22–24 2015 : book of abstracts. — [Kraków : AGH], [2015]. — S. 77
  • keywords: nickel superalloys, Inconel, jet engine, incremental sheet forming

    cyfrowy identyfikator dokumentu:

2
  • [referat, 2015]
  • TytułAn effect of epoxy laminate composites modified using metallic powders
    AutorzyKITA Paweł, POCIECHA Daniel, GŁODZIK Marcin, Krzysztof ŻABA, PUCHLERSKA Sandra
    ŹródłoICCS18 – 18th International Conference on Composite Structures [Dokument elektroniczny] : Lisbon, Portugal, June 15–18, 2015 : [book of abstracts] / ed. António Joaquim Mendes Ferreira. — [Portugal : s. n.], [2015]. — S. 165 (abstr. no. 7895)
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

3
  • [artykuł w czasopiśmie, 2009]
  • TytułAnalysis of material deformation during the new cold tube rolling process realized on the new generation of pilger mills
    AutorzyJ. OSIKA, H. Palkowski, K. ŚWIĄTKOWSKI, D. POCIECHA, A. KULA
    ŹródłoArchives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science. — 2009 vol. 54 iss. 4, s. 1239–1251
  • keywords: finite element method, stereophotogrammetric method, cold pilger tube rolling, deformation measurement, finite difference method

    cyfrowy identyfikator dokumentu:

4
  • [referat, 2015]
  • TytułAnalysis of the conditions of force and quality of products of aluminum alloy obtained by the Incremental Forming sheet
    AutorzyMarcin GŁODZIK, Krzysztof ŻABA, Sandra PUCHLERSKA, Daniel POCIECHA, Maciej NOWOSIELSKI
    ŹródłoAMPT 2015 : Advances in Materials & Processing Technologies : Madrid, December 14–17, 2015 : program/book of abstracts. — [Madrid : s. n.], [2015]. — S. 254
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

5
6
  • [referat, 2014]
  • TytułApparatus system of interoperational quality control for wax assembly and multilayer ceramic moulds in investment casting process
    AutorzyMichał KWIATKOWSKI, Krzysztof ŻABA, Maciej NOWOSIELSKI, Sandra Puchlerska, Daniel POCIECHA
    ŹródłoICNFM 2014 : [1st International Conference on Non-Ferrous Metals – processing and new materials] : Wisła, Poland, June 4–6 2014 : book of abstracts / AGH University of Science and Technology. Faculty of Non-Ferrous Metals. — [Kraków : AGH], [2014]. — S. 89
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

7
8
9
  • [referat, 2015]
  • TytułEffect of metallic particles on impact properties for glass-polymer laminates
    AutorzyPaweł KITA, Krzysztof ŻABA, Daniel POCIECHA
    ŹródłoICNFM 2015 : [2textsuperscript{nd} International Conference on Non-Ferrous Metals] : Cracow, Poland, June 22–24 2015 : book of abstracts. — [Kraków : AGH], [2015]. — S. 84
  • keywords: polymer composite, impact test, woven glass

    cyfrowy identyfikator dokumentu:

10
  • [referat, 2015]
  • TytułExpert system of operational control and improvement of special processes in aircraft engine critical parts investment casting : [abstract]
    AutorzyMichał KWIATKOWSKI, Krzysztof ŻABA, Stanisław NOWAK, Daniel POCIECHA, Adam Sury, Marek Wojtas, Bogusław ŚWIĄTEK
    ŹródłoPANACM 2015 [Dokument elektroniczny] : 1st Pan-American Congress on Computational Mechanics in conjunction with the XI Argentine congress on Computational mechanics, MECOM 2015 : 27–29 April, 2015, Buenos Aires, Argentina : technical program. — Barcelona : CIMNE, 2015. — s. [1]
  • keywords: investment casting, expert system, superalloys, special processes

    cyfrowy identyfikator dokumentu:

11
  • [referat, 2012]
  • TytułFEM analysis of new pilger rolling process
    AutorzyDaniel POCIECHA, Jan OSIKA
    ŹródłoKU KDM 2012 : fifth ACC Cyfronet AGH user's conference : Zakopane, March 07–09, 2012 : proceedings / eds. Kazimierz Wiatr, Jacek Kitowski, Marian Bubak. — Kraków : ACC Cyfronet AGH, cop. 2012. — S. 14–15
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

12
  • [referat, 2015]
  • TytułIncremental Sheet Forming of nickel superalloys
    AutorzySandra PUCHLERSKA, Krzysztof ŻABA, Marcin GŁODZIK, Daniel POCIECHA
    ŹródłoAMPT 2015 : Advances in Materials & Processing Technologies : Madrid, December 14–17, 2015 : program/book of abstracts. — [Madrid : s. n.], [2015]. — S. 16–17
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

13
  • [referat, 2015]
  • TytułInfluence of Incremental Sheet Forming process parameters on the aluminum alloy formability
    AutorzyKrzysztof ŻABA, Marcin GŁODZIK, Daniel POCIECHA, Sandra PUCHLERSKA, Maciej NOWOSIELSKI
    ŹródłoICNFM 2015 : [2textsuperscript{nd} International Conference on Non-Ferrous Metals] : Cracow, Poland, June 22–24 2015 : book of abstracts. — [Kraków : AGH], [2015]. — S. 83
  • keywords: aluminium alloy, formability, incremental forming

    cyfrowy identyfikator dokumentu:

14
  • [referat, 2015]
  • TytułInfluence of metallic allowance on static and dynamic properties of epoxy laminates
    AutorzyKITA Paweł, ŻABA Krzysztof, POCIECHA Daniel
    ŹródłoMetal 2015 : 24textsuperscript{th} international conference on Metallurgy and materials : June 3textsuperscript{rd}–5textsuperscript{th} 2015, Brno, Czech Republic : proceedings of abstracts / TANGER Ltd., [et al.]. — Ostrava : TANGER Ltd., cop. 2015. — S. 150
  • keywords: mechanical properties, composite, epoxy resin, L-RTM technology

    cyfrowy identyfikator dokumentu:

15
  • [referat, 2015]
  • TytułInfluence of wax assembly and ceramic mould status on product quality in investment casting of jet engine critical parts
    AutorzyKWIATKOWSKI Michał, ŻABA Krzysztof, POCIECHA Daniel, Cygan Rafał
    ŹródłoMetal 2015 : 24textsuperscript{th} international conference on Metallurgy and materials : June 3textsuperscript{rd}–5textsuperscript{th} 2015, Brno, Czech Republic : proceedings of abstracts / TANGER Ltd., [et al.]. — Ostrava : TANGER Ltd., cop. 2015. — S. 94
  • keywords: investment casting, superalloys, turbine blades, computer simulation

    cyfrowy identyfikator dokumentu:

16
17
  • [referat, 2013]
  • TytułModelowanie matematyczne, jako narzędzie wspomagające proces projektowania i testowania materiałów kompozytowych : [streszczenie]
    AutorzyDaniel POCIECHA, Krzysztof ŻABA, Teresa Machulec, Maciej NOWOSIELSKI
    ŹródłoMateriały, technologie, człowiek : 10-04-2013–12-04-2013. — [Kraków : AGH. Katedra Struktury i Mechaniki Ciała Stałego], [2013]. — S. [1–2]
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

18
  • [referat, 2016]
  • TytułOnline tracking for single unit in investment casting of jet engine critical components
    AutorzyMichał KWIATKOWSKI, Adam Sury, Daniel POCIECHA, Rafał Cygan, Marek Wojtas, Krzysztof ŻABA
    ŹródłoWFC2016 [Dokument elektroniczny] : the 72textsuperscript{nd} World Foundry Congress : May 21–25, 2016, Nagoya, Japan : proceedings. — [Japan : s. n.], [2016]. — S. [1–2] O-69
  • keywords: tracking, investment casting, expert system, superalloys

    cyfrowy identyfikator dokumentu:

19
  • [referat, 2014]
  • TytułOperational risk assessment of failure to obtain the properties of thermal treatment of air aluminum alloys
    AutorzyStanisław NOWAK, Bogusław ŚWIĄTEK, Krzysztof ŻABA, Adam Sury, Marek Wojtas, Marcin Głodzik, Daniel POCIECHA, Sandra Puchlerska
    ŹródłoWCCM XI ; ECCM V ; ECFD VI [Dokument elektroniczny] : 11th World Congress on Computational Mechanics ; 5th European Conference on Computational Mechanics : 6th European Conference on Computational Fluid Dynamics : Barcelona, Spain, 20–25 July 2014. — [Barcelona : International Center of Numerical Methods Engineering], 2014. — S. [1]
  • keywords: neural networks, aluminium, variability problems

    cyfrowy identyfikator dokumentu:

20
  • [referat w czasopiśmie, 2008]
  • TytułParametry siłowe pielgrzymowania rur na zimno w walcarkach nowej generacji
    AutorzyJan OSIKA, Kazimierz ŚWIĄTKOWSKI, Daniel POCIECHA
    ŹródłoRudy i Metale Nieżelazne. — 2008 R. 53 nr 11, s. 675–679
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

21
  • [fragment książki, 2012]
  • TytułProblemy związane z montażem statków powietrznych – nitowanie
    AutorzyMarcin Głodzik, Krzysztof ŻABA, Stanisław NOWAK, Daniel POCIECHA
    ŹródłoDoskonalenie jakości procesów technologicznych : IV konferencja : Sromowce Niżne, 23–25 maja 2012 : monografia / pod red. Krzysztofa ŻABA ; Akademia Górniczo-Hutnicza im. Stanisława Staszica. Wydział Metali Nieżelaznych. Pracownia Inżynierii Produkcji. — Kraków : Wydawnictwo Naukowe „Akapit”, 2012. — S. 173–185
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

22
  • [referat w czasopiśmie, 2013]
  • TytułPrototypowy system pomiaru odkształceń w procesie walcowania pielgrzymowego rur na zimno
    AutorzyDaniel POCIECHA, Jan OSIKA, Marcin MROCZKOWSKI, Bożena BORYCZKO
    ŹródłoPrace Naukowe Politechniki Warszawskiej. Seria: Mechanika. — 2013 z. 253, s. 25–30
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

23
  • [referat, 2015]
  • TytułResearch of static and dynamic properties of composite structures manufactured with polyurethane resins
    AutorzyGŁODZIK Marcin, KITA Paweł, POCIECHA Daniel, ŻABA Krzysztof, PUCHLERSKA Sandra
    ŹródłoICCS18 – 18th International Conference on Composite Structures [Dokument elektroniczny] : Lisbon, Portugal, June 15–18, 2015 : [book of abstracts] / ed. António Joaquim Mendes Ferreira. — [Portugal : s. n.], [2015]. — S. 243 (abstr. no. 7893)
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

24
  • [referat, 2014]
  • TytułRisk assesment failure to obtain the mechanical properties of heat treatment processes components of aircraft structures made of aluminum alloys 2XXX series
    AutorzyMarcin Głodzik, Stanisław NOWAK, Daniel POCIECHA, Krzysztof ŻABA
    ŹródłoICNFM 2014 : [1st International Conference on Non-Ferrous Metals – processing and new materials] : Wisła, Poland, June 4–6 2014 : book of abstracts / AGH University of Science and Technology. Faculty of Non-Ferrous Metals. — [Kraków : AGH], [2014]. — S. 120–121
  • brak zdefiniowanych słów kluczowych

    cyfrowy identyfikator dokumentu:

25
  • [artykuł w czasopiśmie, 2010]
  • TytułStanowisko wizyjnego śledzenia odkształceń metalu w procesie obróbki plastycznej na zimno
    AutorzyDaniel POCIECHA, Mirosław JABŁOŃSKI
    ŹródłoAutomatyka : półrocznik Akademii Górniczo-Hutniczej im. Stanisława Staszica w Krakowie. — 2010 t. 14 z. 3/1, s. 453–465. — tekst: http://journals.bg.agh.edu.pl/AUTOMATYKA/2010-03-1/Auto18.pdf
  • słowa kluczowe: walcowanie pielgrzymowe rur na zimno, wizyjny pomiar odkształceń, metoda stereofotogrametryczna

    keywords: pilgering process, vision deformation measurement, stereophotogrammetric method

    cyfrowy identyfikator dokumentu: